GP-1320 Lemon Yellow
A long-term multi-purpose outdoor ink designed to print on a wide range of substrates. GP-0000 Series ink eliminates the need for carrying a large inventory of different types of ink. Ideal for P.O.P. and general display applications where a gloss finish, scuff resistant surface are required.
Substrates PAPER, CARD, WOOD, POLYSTYRENE, VINYLS (PVC), ABS, ACRYLICS, TOP COATED POLYESTER, TYVE.
Thinning: May be used straight from the can but it is HIGHLY recommended to thin 5 - 15% by weight with GP-1800 Thinner. Substitute GP-1800 Thinner with GP-1820 Slow Thinner/Retarder to improve screen stability. For maximum lightfastness or outdoor durability little or no thinning is recommended.
Additives: GP-1700 Clear should only be used to increase transparency of colors. However, this will reduce the durability and lightfastness of the color. To improve scuff resistance, add up to 10% GP-1860 Anti-Scuff Agent. Use GP-1350 Overprint Clear to increase scuff resistance or to provide a uniform gloss level to a GP-0000 ink ilm. Add 5% to 10% of DC-393 Gel Retarder to thinned ink to maintain screen stability. Use a small amount of GP-1730 Process Clear to improve print quality if required.
Wash-Up: GP-1800 Thinner, GP-1840 Wash-Up
Coverage: Approximately 2100 sq. ft./1 U.S. Gallon using a280/in. monofilament fabric.
Fabric/Stencil: 200 to 355 monofilament fabric. Direct and indirect photo stencil or water-soluble hand cut stencils are suitable.
Drying: By solvent evaporation. GP-0000 Series dries in 15 to 30 minutes at normal room temperature or can be jet dried 20 to 45 seconds at 150 °F. to 200 °F. Allow more time between prints for multiple color jobs.