- Inktech AM
- >
- AM-2120 EX-Opaque White
AM-2120 EX-Opaque White
SKU:
$41.95
41.95
165
$29.37 - $115.50
$29.37
On Sale
Unavailable
per item
A fast-dry, long term outdoor vinyl ink designed to print on a wide variety of vinyl and vinyl coated products. Ideal for fleet markings and membrane switches.
SUBSTRATES : PRESSURE SENSITIVE VINYL FILMS, VINYL COATED PRODUCTS, VINYL TOP-COATED POLYESTER FILMS, ACRYLIC, REFLECTIVE VINYL, FLEXIBLE VINYL AWNINGS, ABS, POLYCARBONATE.
Thinning : May be used straight from the can but it is recommended to thin 5 - 15% by weight with AM-1800 Thinner. Substitute AM-1800 Thinner with AM-1820 Slow Thinner to improve screen stability when shop conditions are hot. When printing on Polycarbonate, acrylics and PETG thinning with AM-3200 Anti-Crazing Thinner may prevent crazing on substrate. For maximum light fastness or outdoor durability, little or no thinning is recommended.
Additives : AM-1700 Clear can be used to increase transparency of colors. However, this will reduce the durability and light fastness of the color. Add 5 - 10% DC-393 Gel Retarder to thinned ink to maintain screen stability. If required, use a small amount of AM-1730 Process Clear ink to improve print quality.
Wash-Up : AM-1800 Thinner ITC-1840 Wash-Up
Coverage : Approximately 2100 sq.ft./1 U.S. Gallon using a 280/in Monofilament fabric
Fabric/Stencil : 200 to 355 monofilament fabric. Direct and indirect photos tencil or water soluble hand cut stencils are suitable.
Drying : By solvent evaporation. AM-0000 Series air dries in 10 to 20 minutes or can be Jet-Dried to 20-45 seconds at 150°F to 200°F. Allow more time when overprinting to avoid possible re-wetting of previous colors.
SUBSTRATES : PRESSURE SENSITIVE VINYL FILMS, VINYL COATED PRODUCTS, VINYL TOP-COATED POLYESTER FILMS, ACRYLIC, REFLECTIVE VINYL, FLEXIBLE VINYL AWNINGS, ABS, POLYCARBONATE.
Thinning : May be used straight from the can but it is recommended to thin 5 - 15% by weight with AM-1800 Thinner. Substitute AM-1800 Thinner with AM-1820 Slow Thinner to improve screen stability when shop conditions are hot. When printing on Polycarbonate, acrylics and PETG thinning with AM-3200 Anti-Crazing Thinner may prevent crazing on substrate. For maximum light fastness or outdoor durability, little or no thinning is recommended.
Additives : AM-1700 Clear can be used to increase transparency of colors. However, this will reduce the durability and light fastness of the color. Add 5 - 10% DC-393 Gel Retarder to thinned ink to maintain screen stability. If required, use a small amount of AM-1730 Process Clear ink to improve print quality.
Wash-Up : AM-1800 Thinner ITC-1840 Wash-Up
Coverage : Approximately 2100 sq.ft./1 U.S. Gallon using a 280/in Monofilament fabric
Fabric/Stencil : 200 to 355 monofilament fabric. Direct and indirect photos tencil or water soluble hand cut stencils are suitable.
Drying : By solvent evaporation. AM-0000 Series air dries in 10 to 20 minutes or can be Jet-Dried to 20-45 seconds at 150°F to 200°F. Allow more time when overprinting to avoid possible re-wetting of previous colors.
Telephone810-635-8844 | Fax: 810-635-8862 | 800-241-0453
4454 Elms Rd | Swartz Creek, Michigan 48473 Office open Monday - Friday 8:00a.m. - 4:30p.m. Friday only closed 12:00 - 1:00p.m. for Lunch |
onesourcestore@gmail.com
|
All in stock orders placed before 3:00pm est. Mon-Friday (excluding holidays) will ship the same day
provided they are placed with a VALID EMAIL & VALID SHIPPING ADDRESS
Orders must pass USPS address verification.
FedEx & UPS shipping also available.
provided they are placed with a VALID EMAIL & VALID SHIPPING ADDRESS
Orders must pass USPS address verification.
FedEx & UPS shipping also available.