Glow Strong (Glow-in-the-Dark)
SKU:
$85.00
$85.00 - $255.00
per item
Glow Strong (Glow-in-the-Dark)
Glow Strong has an extremely high pigment loading, compared to other manufactures, therefore providing a brighter and more long lasting glow.
Bleed Resistance: None
Opacity: Medium
Storage: Ideally 65F to 80F. Keep out of direct sunlight.
Mesh: 86-110
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet to increase to increase production.
Modifications: Reduce viscosity use Curable Reducer, improve stretch use G&S Base, puff use Puff Additive, extend color use Soft-hand Base, &for suede puff or dulling use Suede Additive.
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
Flashing: 700F for 9 econds, just enough for the surface to be tack free.
Squeegee Blade: Sharp.
Fusion/Curing: 325F/160C for 1 to 1 and 1/2 minutes, Oven temperature can be increased and dwell time decreased. For heat presses use 390F/195C for 8 seconds.
Wash-up: Any plastisol cleaner.
Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed.
Glow Strong has an extremely high pigment loading, compared to other manufactures, therefore providing a brighter and more long lasting glow.
Bleed Resistance: None
Opacity: Medium
Storage: Ideally 65F to 80F. Keep out of direct sunlight.
Mesh: 86-110
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet to increase to increase production.
Modifications: Reduce viscosity use Curable Reducer, improve stretch use G&S Base, puff use Puff Additive, extend color use Soft-hand Base, &for suede puff or dulling use Suede Additive.
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
Flashing: 700F for 9 econds, just enough for the surface to be tack free.
Squeegee Blade: Sharp.
Fusion/Curing: 325F/160C for 1 to 1 and 1/2 minutes, Oven temperature can be increased and dwell time decreased. For heat presses use 390F/195C for 8 seconds.
Wash-up: Any plastisol cleaner.
Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed.